Tennant T7 – How to Fill the Clean Water Tank
Video Description
This step-by-step video guide shows you how to fill the clean water tank correctly on the Tennant T7 floor scrubber dryer. Proper filling is essential for consistent scrubbing performance, and this video walks you through everything you need to know before putting the machine to work.
In this video, you will see exactly:
- how to access the clean water tank fill points
- why a hose is recommended over a bucket
- how to drain the clean water tank using the rear hose
- why you should not leave chemical solution in the tank for more than a day
- how to refresh the tank water and chemical for optimal results
Following these steps helps protect internal components and ensures the machine delivers reliable cleaning results throughout your shift.
If you are unsure about any part of the process – or you need servicing, repairs, parts, or technical support for your Tennant T7 – contact Alpha Power Cleaners. Our team specialises in Tennant scrubber dryers and industrial floor cleaning machines, providing expert help whenever you need it.
Video Transcript
Hi, I’m Dave from Alpha Power Cleaners and in this video I’m going to show you how to fill a clean water tank on a T7.
The clean water tank – you can get in at two places. First is under the step at the front there. The flat panel comes up at the front and you can fill it in there, or at the rear, the side of the machine at the back there is a cap. You can also fill it in there.
I would recommend using a hose and not a bucket because using a bucket it splashes everywhere and causes a hazard, as well as it’s not good for the machine.
If you want to empty the clean water tank, there is a hose on the back of the machine that you use to empty it. Just simply screw the cap off the end of the hose, place it on the floor, and that will drain the machine.
I would also not recommend leaving chemical in the machine for longer than a day because this will have an impact on the filters and the rest of the machine. If you’ve left a solution in the tank previously, I would advise emptying that water and refilling it to refresh the water and chemical.
