Tennant T12 – How to Replace the Brush Heads
Video Description
This video guide from Alpha Power Cleaners shows you how to replace the brush heads on a Tennant T12 floor scrubber dryer. Changing worn brushes is a straightforward task that any operator can carry out to keep the machine cleaning effectively.
In this video, you will see exactly:
- how to open the outer door on the magnetic strip to access the brush
- how to turn and squeeze the toggles to release the brush
- how to slide the old brush out from under the machine
- how to slide the new brush in and locate it onto the drive dog
- how to push the brush up until it clicks into place and secure the door
Once you hear the click, you’ll know the brush is correctly seated and the machine is ready to use.
If you are unsure about any part of the process – or you need servicing, repairs, parts, or technical support for your Tennant T12 – contact Alpha Power Cleaners. Our team specialises in Tennant scrubber dryers and industrial floor cleaning machines, providing expert help whenever you need it.
Video Transcript
Hi, I’m Nick from Alpha Power Cleaners. Today we’re going to be discussing the Tennant T12 ride-on scrubber dryer. In this particular video, we’ll be discussing how to replace your brushes.
To do so, you simply open the outer door on the magnetic strip. To release the brush, you turn it until you see the two toggles. You simply squeeze them together and this will release your brush. You then slide it out.
To put the new brush on, simply slide it underneath the machine until it lines up with the drive dog. Get your hand underneath the brush and push upwards. You’ll hear a click, and as soon as you hear that click, you know it is perfectly in place.
Then it’s just a case of doing everything in reverse – close the side skirt door, turn the toggle so it’s fastened in place, close the magnetic door, and you’re good to go.
