Tennant T16 – Not Dropping Water Fault
Video Description
This video addresses a common fault where the Tennant T16 ride-on floor scrubber dryer is not dropping water during operation. This issue can significantly impact cleaning effectiveness, and understanding the troubleshooting steps will help you quickly identify and resolve the problem.
The video covers the essential preliminary checks that should be performed first, including verifying that your clean water tank is full, the water settings are properly configured, and that no interfering features like fast settings or EC H2O are accidentally enabled. If these initial checks don’t resolve the issue, you’ll learn how to inspect and clean the water filter, which is often the culprit behind water delivery problems.
In this video, you will see exactly:
- How to verify your clean water tank is full and properly filled
- How to check and configure the water settings to the correct level
- How to disable fast settings and EC H2O features that may interfere
- Step-by-step instructions for accessing and cleaning the water filter
- When to contact Alpha Power Cleaners for professional assistance with solenoid issues
If you’ve tried these troubleshooting steps and your Tennant T16 is still not dropping water, it may be a solenoid issue requiring professional attention. Contact Alpha Power Cleaners today for expert servicing and support to get your machine back in full working order.
If you are unsure about any part of the process – or you need servicing, repairs, parts, or technical support for your Tennant T16 – contact Alpha Power Cleaners. Our team specialises in Tennant scrubber dryers and industrial floor cleaning machines, providing expert help whenever you need it.
Video Transcript
Hello, my name is Rob Freeman and welcome to Alpha Power Cleaners. Today we’re looking at the Tenant T16 ride-on floor scrubber dryer and the fault of the machine not dropping any water. Now, the first thing to do if you’ve not got any water dropping from the machine is make sure that your clean tank is full of water, the water setting is turned on and set to full. After that, ensure there’s no fast settings or EC H2O turned on, make sure these are all turned off. That just eliminates another potential issue.
Next step, if you’re still not getting any water and you’ve got water in your machine and you’ve checked them settings are turned off, check the clean water filter. Now, on the Tenant T16, you need to make sure you drain a clean tank first to access it. And to do this, check out our dedicated checking the water filter video. Once refitted and you test the machine again, you’ve still not got any water, please contact Alpha Power Cleaners. It potentially could be a solenoid issue.
