Tennant T7 – How to Empty the Dirty Water Tank
Video Description
This video guide from Alpha Power Cleaners shows you how to empty and clean the dirty water tank on a Tennant T7 floor scrubber dryer. Emptying the dirty water tank after each use is essential for maintaining hygiene and keeping the machine in good working order.
In this video, you will see exactly:
- where the dirty water tank and drain hose are located on the machine
- how to remove the cap and drain the dirty water tank
- how to lift the seat and lid to access the tank for rinsing
- how to clean the filter inside the dirty water tank
- what the nodding donkey sensor is and how it works
Regular emptying and rinsing of the dirty water tank prevents build-up, protects the sensor, and keeps your machine operating efficiently.
If you are unsure about any part of the process – or you need servicing, repairs, parts, or technical support for your Tennant T7 – contact Alpha Power Cleaners. Our team specialises in Tennant scrubber dryers and industrial floor cleaning machines, providing expert help whenever you need it.
Video Transcript
Hello, I’m Dave from Alpha Power Cleaners. I’m going to show you how to empty a dirty water tank on a Tennant T7 ride-on machine.
The dirty water tank is located at the back of the machine. The dirty water hose to drain the machine is located on the right hand side. To empty the machine, all you have to do is remove the cap on the dirty water tank hose and lay the hose on the floor. This will empty the machine.
To clean the empty water tank, lift the seat and lift the dirty water tank lid. This will expose the dirty water tank, which will enable you to rinse any debris from the tank.
There’s also a filter inside there that you will need to clean. And you would also see a nodding donkey sensor, which is an electronic sensor that tells the machine once it’s full and it needs to be emptied.
