Tennant T300 – How to Check the Water Filter
Hire the T300 Contact Our Team
Video Description
This maintenance and troubleshooting guide covers important procedures for the Tennant T300 floor scrubber dryer. The video provides clear step-by-step instructions to help you maintain optimal machine performance and resolve common operational issues.
In this video, you will see exactly:
- Essential maintenance procedures for your Tennant T300
- Troubleshooting steps for common issues
- Proper inspection and cleaning techniques
- Best practices for keeping your machine operating efficiently
- When to contact Alpha Power Cleaners for professional service
For comprehensive support with your Tennant T300 maintenance, repairs, or any operational questions, contact Alpha Power Cleaners for expert guidance and professional service.
If you are unsure about any part of the process – or you need servicing, repairs, parts, or technical support for your Tennant T300 – contact Alpha Power Cleaners. Our team specialises in Tennant scrubber dryers and industrial floor cleaning machines, providing expert help whenever you need it.
Video Transcript
Hi, I’m Dave from Alpha Power Cleaners and today I’m going to show you how to check the water filter on a Tennant T300 floor scrubber dryer. Before starting, it may be advisable to empty the clean water tank. The water filter is located under the right-hand wheel near the squeegee bar. Unscrew the water filter – you will see it is a clear lens. After removing it, you can see the filter inside the cap. Clean the filter and make sure you keep hold of the orange seal inside.
Screw the filter back on and you are good to go. It is really important to clean the water filter regularly – we find quite often that the machine is not dropping water simply because of a blocked filter. It should be cleaned at least once a week.